Multi fuel capability
Ecochill NXT fuel driven chillers can work on various types of liquid and gaseous fuels like Natural gas, Liquid Petroleum Gas, Compressed Natural gas, Superior Kerosene Oil and High Speed Diesel.
Energy efficient cycle
Special design features of Ecochill NXT chiller-heaters ensure better fuel economy and higher COP.
Easy switch over from cooling to heating mode
Cooling or Heating can be obtained from the same evaporator section, by means of a single valve which simplifies the switchover operation considerably.
10 - 100% stepless modulation
For cooling loads ranging from 10% to 100% of the design capacity, the burner firing can be modulated or varied (depending upon the type of burner) in order to maintain the temperature of chilled water leaving the chiller. This ensures better part load performances.
Auto de-crystallization
The chillers are installed with a unique auto de-crystallization circuit to eliminate any chances of crystallization.
On-line purging
The factory mounted and tested purging unit consists of an electric motor driven purge pump, palladium cell, storage tank, necessary piping and valves. Any non condensable gas generated in the chiller during operation, is purged continuously into the storage tank, thereby maintaining low vacuum in the shell. The gases stored in the tank can be purged periodically. Palladium cell purges hydrogen from the storage tank continuously thus reducing the requirement of running the purge pump.
Isolation valves for the pumps
Isolation valves provided on the pumps facilitates on-line pump maintenance, without breaking the vacuum in the chiller.
Corrosion inhibitor
Thermax uses the new generation Corrosion Inhibitor Lithium Molybdate and is an environmentally friendly inhibitor.
PLC controls
The chillers are provided with state of the art PLC based control panel with unique display, user friendly interface and data-logging.